MC361/MC561/MB451/471/491 - Internet Fax Setup
Doc #:
4127
Category:
Applied Solutions
Last Updated:
01/10/2016
How To:
How to set up internet faxing on the MC361/MC561.

Action:
After setting up scan to e-mail, by reading below, then please follow this "Internet Fax" PDF document >> mc361-561 internet fax.pdf
....................................................................................

Important Note: First, Scan to email will need to be set up. To do this, follow okidoc # 4089 shown below.

Okidoc 4089:
How To:
This document assumes that the MC361/MC561 MFP is properly installed on a network, and that the network settings (TCP/IP) are valid.

For the scanner to send email, it needs to have a valid email account on a mail server. Once that account is set up with the account's user name
and password, configure this information on the Oki. While it is possible to configure this information using the front panel of the unit itself, it is
usually easier to configure the unit using the web interface, which is outlined below.

This document assumes that an email account has been configured and tested using the same authentication information that will
be used on the MFP.

Action:
See the attached PDF for steps to correctly configure the MFP to scan via email.

MC361 MC561 CX2731 Scan to Email.pdf

****NOTE: In step 5 of insturctions go to "ALERT SETTINGS" is using an MB4x1


EU - How To


Product(s):
MB451wMFP; MB461MFP; MB461PlusLP; MB471MFP; MB471wMFP; MB491MFP; MB491Plus; MB491PlusLP
Oki Data has taken care to insure that the information is complete, accurate and up-to-date. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided is subject to change from time to time at the sole discretion of Oki Data.
Copyright 2004, Oki Data, Americas, Inc.